Planmeca Sovereign Classic, User Manual

Page: 131 / 298

23.6.2 Enabling gesture sensor
From both operating light handles
When the operating light is not on, press both handle buttons simultaneously
to toggle the gesture sensor off/on. When the sensor turns off, you will hear
a signal tone that goes down at the end. When the sensor turns on, you will
hear a signal tone that goes up at the end.
By default, the gesture sensor is on.
From dental unit
You can program the gesture sensor to be on or off, see section "Gesture
sensor" on page 193.
23.6.3 Switching operating light on/off
From operating light
From one handle
Briefly press the handle button on either handle to switch the light on. Press
the handle button a second time to switch the light off.
You will hear a clicking sound when you press the button.
23 Operating dental unit
User's manual Planmeca Sovereign Classic 121