Planmeca Sovereign Classic User Manual Download Page 12

Page: 12 / 298

2 Associated documentation

This Planmeca dental unit is delivered with the following manuals and

diagrams:
•

User’s manual
For dental care professionals. Describes the dental unit and its different

parts as well as instructs how to operate and clean the dental unit.

•

Installation manual
For service personnel. Describes how to install the dental unit.

NOTE

Use the installation template (included in delivery) to position the unit

correctly.

•

Technical manual
For service personnel. Gives instructions for service situations.

•

Wiring and pneumatic diagrams (10034555)

Planmeca Romexis software is delivered with the following manuals:
•

Planmeca Romexis user’s manual
For dental care professionals. Describes how to monitor and control the

activities as well as gather data related to dental treatments.

•

Planmeca Romexis quick installation guide
For service personnel. Describes how to install Planmeca Romexis

software.

•

Planmeca Romexis technical manual
For service personnel. Gives instructions for service situations.

The Planmeca Solanna or Planmeca Solanna Vision operating light is

delivered with the following manual:
•

User's manual
For dental care professionals. Describes the operating light and instructs

how to operate and clean it.

•

Installation and technical manual
For service personnel. Describes how to install the operating light to the

ceiling or wall, and gives instructions for service situations.
The operating light's installation to the dental unit is described in the

dental unit's installation manual.

The intraoral X-ray unit Planmeca ProX can be installed to the Planmeca

dental unit. Planmeca ProX is an option that is available in selected market

areas. Please contact your local sales representative for details.
Planmeca ProX is delivered with the following manuals:
•

User’s manual
For dental/health care professionals. Describes the intraoral X-ray unit

and its different parts as well as instructs how to operate and clean the

X-ray unit.

•

Installation manual
For service personnel. Describes how to install the intraoral X-ray unit.

2 Associated documentation

2 Planmeca Sovereign Classic

User's manual

Summary of Contents for Sovereign Classic











































































































































































































































































































Search results

Summary of Contents for Sovereign Classic

Reviews:

Brands by name

Popular brands

Planmeca Sovereign Classic, User Manual

Search results

Summary of Contents for Sovereign Classic

Reviews:

Brands by name

Popular brands