Planmeca Sovereign Classic, User Manual

Page: 117 / 298

22 Operating patient chair
NOTE
All chair movements are blocked when an instrument, excluding syringe, is
operated
NOTE
The operating light intensity will decrease slightly when the chair is moving.
NOTE
As an alternative to the control panel buttons described below, the chair
buttons on the Flexy-panel can be used to drive the chair.
22.1 Manual operation
CAUTION
When driving the chair near the upper limit, make sure that the console arm
does not press or hit the patient.
CAUTION
When driving the backrest up, make sure that the patient’s hand or arm does
not get squeezed between the armrest and the backrest.
NOTE
When the specialist mode is enabled, the manual chair movements are by
default slower than in the normal mode. Also, the chair movement buttons
look different, see section "Specialist mode" on page 115.
To drive the backrest down, press the Backrest down button until the chair
reaches the required position.
NOTE
If the chair is equipped with an optional automatic legrest, the legrest
position is adjusted simultaneously with the backrest position.
22 Operating patient chair
User's manual Planmeca Sovereign Classic 107