Planmeca ProSensor, User Manual

Page: 7 / 28

Planmeca ProSensor 3
SAFETY PRECAUTIONS
User’s Manual
4 SAFETY PRECAUTIONS
NOTE The system should be operated by qualified
personnel only.
NOTE EMC requirements have to be considered, and the
equipment must be installed and put into service
according to the specific EMC information provided
in the accompanying documents.
CAUTION Handle the Planmeca ProSensor according
to the instructions given in this manual. Do
not pinch the sensor or the
cable
.
Do not to
drop the sensor or pull strongly the sensor
cable. Never cut, nick or sharply bend the
sensor cable. Always advise the patient not
to bite the sensor or the cable. The
Planmeca limited warranty does not cover
damage which is due to misuse, e.g.
dropping the sensor, neglect, or any cause
other than ordinary application.
CAUTION Do not let the sensor cable run along the
floor. Protect the cable from rolling over it
with a chair or walking over it.
CAUTION Do not store or use the Planmeca Sensor
near (3m or 10 ft) an electrosurgical knife.
CAUTION Do not unnecessarily touch the connector
pins to keep them clean.