Planmeca ProSensor, User Manual

Page: 14 / 28

CAPTURING INTRAORAL IMAGES
10 Planmeca ProSensor
User’s Manual
8 CAPTURING INTRAORAL IMAGES
When connecting the sensor for the first time the
message
Loading calibration files will appear on the
Romexis window. Also if you connect the same sensor to
another workstation the files will be loaded again.
8.1 Capturing single intraoral images
1. Click the Intraoral Exposure button on the upper toolbar to
initiate the intraoral image capture mode.
2. The Intraoral Exposure window appears.
3. When the X-ray unit is in ready state a message Waiting
for Ready appears on top of the window.
4. Prepare the patient for exposure, select exposure
parameters and position Planmeca ProX as required, for
more information refer to Planmeca ProX user’s manual.
NOTE Inform the patient that the sensor may feel warm in
the mouth.