After completion of the milling process, the file will be automatically moved
to the archive where it can be found and restored later, if necessary, or
deleted.
NOTE
To select whether the milling file should be archived, press Settings > Jobs,
and then press the Use archiving toggle button in the
Archiving field. You
can also adjust the duration for how long the milling file is archived.
13.3.2 Options for milling files
In the options for milling files you can load milling files into the list of milling
files. Milling files can also be prioritised and archived. From the archive the
milling files can be deleted.
Load milling file into the list of milling files
Archive milling file *
Move the milling file up in priority
Move the milling file down in priority
* To select whether the milling file should be archived, press Settings > Jobs,
and then press the Use archiving toggle button in the
Archiving field. You
can also adjust the duration for how long the milling file is archived.
13.3.3 Processing status display
The processing status display shows run times and percentage status for the
currently ongoing milling file.
1 Percentage status of the current milling file
2 Start time of current milling file
3 Duration of the current milling file
4 Elapsed time of current milling file
13 Control software
40 Planmeca PlanMill 60 S
User's manual
