4.12 Qualifications
The tasks described in this user’s manual require different kinds of
qualifications of the persons entrusted with these tasks.
WARNING
Hazard due to insufficient qualification of personnel! Risks that arise due to
the operation of the unit by unqualified persons cannot be properly
assessed. Such persons may place themselves or others at risk of death or
serious injury. To avoid this risk all work must only be carried out by suitably
qualified persons. Insufficiently qualified persons must be kept away from
the work area. Persons with impaired coordination or responsivity due to
drugs, alcohol, or medication should not perform any work on the unit.
The qualifications for the various tasks are listed below.
4.12.1 User
The operator must instruct the user on the duties assigned to them and the
possible hazards of improper conduct. All tasks that go beyond operation in
normal mode may only be performed by the user if the operator has
expressly assigned them the task.
4.12.2 Electrician
A qualified electrician can independently perform work on electrical systems
and recognize and avoid possible dangers due to their technical training,
knowledge and experience as well as their knowledge of relevant standards
and regulations.
A qualified electrician is familiar with all relevant standards and regulations
applicable to the working environment in which they work.
4.12.3 Qualified personnel
Qualified personnel can independently recognise and avoid possible
dangers and hazards due to their technical training, knowledge and
experience.
4.12.4 Manufacturer
Certain work may only be performed by manufacturer's technical personnel.
Contact your local dealer if any such work needs to be carried out.
WARNING
The attachment of accessories to the milling unit and any other modifications
require the express permission of the manufacturer. All attachments and
modifications that may affect the operational safety of the milling unit are
strictly prohibited!
4 For your safety
18 Planmeca PlanMill 50 S
User's manual
