Planmeca Planmeca ProMax 3D Classic User Manual Download Page 72

Page: 72 / 90

12 SETTINGS

68 Planmeca ProMax 2D & 3D s & 3D Classic

User’s Manual (2D)

12.2 Program settings

12.2.1 Programs (2100)

•

To turn a program(s) ON or OFF:

1. Select Program > 2100 Programs.
2. Select a program group (e.g. 2D Panoramic).
3. Turn a program type(s) (e.g. Interproximal) ON or

OFF.

4. Select the green check mark button.

NOTE

The function is available for programs that have been

activated in menu 2300 Licences.

•

To permanently adjust preset exposure values:

1. Select Program > 2100 Programs.
2. Select a program group (e.g. 2D Panoramic).
3. Select a program type (e.g. Interproximal).

Program types that are not available on your X-ray

unit are shown with a light gray background color.

4. Select the exposure values you wish to adjust (e.g.

66 kV / 8 mA for patient size M).
•

In combined 2D tomographic programs (cross-

sec longitudinal) only the cross-sectional

exposure values can be adjusted.

•

In 3D programs the exposure values are given

separately for each image resolution. The image

resolutions that are not available are shown with

faded buttons. Select also the ULD (Ultra Low

Dose) button if you wish to adjust the presets for

the ULD function.

5. Use the minus or plus buttons to set the exposure

values you wish to use.

6. Select the green check mark button.
7. Repeat for an other program type, patient size or

image resolution (3D) if needed.

8. Select the green check mark button.

NOTE

Always try to minimize the radiation dose to the patient.

NOTE

You can restore the exposure values that have been

preset at the factory (i.e. overrule your own settings) by

selecting Program > 2500 Reset to Factory Defaults.

NOTE

You can adjust the preset exposure values temporarily as

described in section 9.2.3 “Adjusting exposure values for

current exposure” on page 29.

Summary of Contents for Planmeca ProMax 3D Classic



























































































Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands

Planmeca Planmeca ProMax 3D Classic, User Manual

Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands