7 PROGRAMS
User’s Manual (2D)
Planmeca ProMax 2D & 3D s & 3D Classic 19
7 PROGRAMS
The X-ray unit uses SCARA (Selectively Compliant
Articulated Robot Arm) technology for arm movements.
Planmeca ProMax 2D S3 and Planmeca ProMax 3D units
have three joints (S3 = SCARA 3) and allow limitless
imaging possibilities. Planmeca ProMax 2D S2 units have
two joints (S2 = SCARA 2) and offer a more limited
selection of exposure programs.
NOTE
The image width and height depend on the X-ray unit
model and sensor. The images shown here are only
examples.
7.1 Panoramic programs
Standard
The standard panoramic program has a traditional path
and angles of the beam.
Bitewing
This program produces bitewing images from premolar
and molar areas including parts of maxilla, mandible and
rami. The bottom of the maxillary sinus as well as the
mandibular canal and the mental foramen are also visible.
NOTE
This program is optimized for interproximal imaging and a
shadow of the opposite side teeth may therefore be visible
in the image.
Interproximal
The basic imaging geometry is the same as in the
standard panoramic program but the X-ray beam is more
parallel to the interproximal contacts of the teeth.
NOTE
This program is optimized for interproximal imaging and a
shadow of the opposite side teeth may therefore be visible
in the image.
Summary of Contents for Planmeca ProMax 3D Classic
Page 1: ...PlanmecaProMax 2D 3D s 3D Classic EN 10033256_8 user s manual 2D imaging ...
Page 2: ......
Page 88: ......
Page 89: ......