Hands-free with sensor
Wave your hand twice in front of the sensor to switch the composite mode
on/off.
The light will switch to composite mode after you have moved your hand
away from the sensor activation area for the second time.
You will hear a clicking sound each time you wave your hand in front of the
sensor.
From dental unit
When you switch the composite mode on, the indicator light on the
Composite mode button is lit.
Control panel: Press Composite mode to switch the operating light’s
composite mode on or off.
NOTE
The dental unit can be configured so that you can switch the operating light's
composite mode on or off by pressing the Flexy button. Contact your
Planmeca dealer.
NOTE
The foot control can be configured so that the composite mode is switched
on/off when you push the left- or the right-side knob up. Contact your
Planmeca dealer.
22.6.4 Adjusting intensity of operating light
The intensity adjustment range is from 30% to 100%.
Each time you adjust the intensity, the direction of the adjustment (increase/
decrease) changes. Thus, if you first increase the intensity, the intensity will
be decreased the next time you adjust it.
You will hear short successive clicking sounds while the intensity is being
adjusted and a long signal tone when the maximum/minimum intensity is
reached.
22 Operating dental unit
122 Planmeca Compact i
User's manual
Summary of Contents for Compact i5
Page 1: ...PlanmecaCompact i5 user s manual EN 30011782...
Page 10: ...Table of contents Planmeca Compact i User s manual...
Page 325: ......
