Planmeca Compact I, Technical Manual

Page: 21 / 244

Planmeca Compact i B-1
Chapter
Technical Manual
B
CONTROL PANEL FUNCTIONS
1 CONTROL PANEL OVERVIEW
NOTE For units equipped with the Plus package refer to the Planmeca Compact i
User’s Manual.
This chapter describes the control panel functions in normal and service modes. There are
some special control and display modes that are not normally available but which can be
entered by certain key sequences. In the following it is explained what operations can be
achieved with the keys and which indications appear on the display.
S
C
D
A
B
1
2
3
4
7
6 5
8
9
(1) Multi-purpose Display;
“PCI” -text displayed when unit is idle
- instrument speed or power
- polymerization light curing time
- help and error messages
- instrument settings in program mode
- other unit settings in program mode
- service mode information
(2) Program mode key and indicator light
(3) Patient chair control keys;
A - backrest down / go to position A
B - backrest up / go to position B
C - seat up / go to position C
D - seat down / go to position D
S - run to / return from spittoon position
(4) Bowl rinse/glass fill key
(5) Extra function key (door open / nurse call etc.)
(6) Operating light control key
(7) Instrument spray key and indicator light
(8) Micromotor reverse key and indicator light
(9) Automatic chip-blow key and indicator light