Planmeca Compact i Touch v2 User Manual Download Page 196

Page: 196 / 314

25.4.8.2 Saving modified preset values

About this task

When you have modified the settings of a Morita TORX micromotor preset,

you can store them under that specific preset so that the modified settings

are in use next time you select that preset.

Steps

1. Press Program.

2. Press Preset.

3. Press OK to confirm that you want to save the new settings.

If you do not want to save the new settings, press Cancel.
The preset window is closed. The settings are stored in the dental unit

when you return the instrument to its holder.

25.4.9 Planmeca Lumion Plus polymerisation light

About this task

NOTE

The duration of the polymerisation cycle can be programmed only for the

Planmeca Lumion Plus polymerisation light.

Steps

1. Activate the instrument.
2. Press Program.

3. Press Polymerisation cycle.

A pop-up window opens.

4. Adjust the length of the polymerisation cycle.

The value range is 5 - 100 seconds. The adjustment step is 5 sec. and

the default value is 10 sec.

5. Press OK.

25 Programming

186 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 196 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: