Planmeca Compact i Touch v2 User Manual Download Page 181

Page: 181 / 314

24.2 Tilting high-volume suction

When you lift the suction handpiece from its holder, the weight of the suction

tube will cause the end of the handpiece to “tilt” slightly. This action opens

the handpiece valve allowing the suction to start.

You can stop the suction temporarily by “straightening” the suction

handpiece with your thumb and forefinger.
If you temporarily put the suction handpiece down during dental treatment,

the suction will automatically stop as the force of the suction will straighten

the handpiece.

24 Operating suction handpieces

User's manual

Planmeca Compact i 171

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 181 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: