Copyright Planika Sp. z o.o.
www.planikafires.com
IG0033#08
2020-03-20
33
•
Pilot Flame Adjustment
The pilot flow adjustment is preset to maximum at the factory. The pilot flame should envelope ⅜ʺ
to ½ʺ of the thermocouple
o
The adjustment screw can be reached through a hole in the MANUAL knob (see figure 21).
o
Turn the MANUAL knob to the ON position.
o
It is now possible to pierce through a film on the cover with a screwdriver to reach the
adjustment screw beneath.
o
Turn the adjustment screw clockwise to decrease or counterclockwise to increase pilot flame.
•
Outlet Pressure Adjustment (High Fire)
o
Connect a pressure manometer to the valve outlet pressure tap. Pressure tap is opened by
turning the screw counterclockwise. Pressure regulator or throttle are located under the cover
and can be reached by removing the plug (see figures 21 and 23).
