Planex Mini-103MN, User Manual

Page: 34 / 70

34
Use NDS Mode:
To Enable NDS Mode, if you want to setup NDS environment. To select Tree
Name of NetWare then input context name in the Context box.
Bindery Mode:
To Enable Bindery Mode, if you want to setup Bindery environment. To select
File Server Name of NetWare.
Installing Print Server on NetWare 4.x/5.x
Due to its architecture and functionality, the print server must work under NetWare 4.x/5.x
NDS Bindery Emulation. When you install the NetWare file server for the first time, by default,
the installation program will automatically set up the
Bindery Emulation function for you by
adding “SET BINDERY CONTEXT =” in the AUTOEXEC.NCF file. By default, the bindery
context will only be set on your organization (O) object.
If you have ever modified this line, or if you have ever added any organization units (OU) to
your NDS tree after the NetWare system was installed, please read the following section
before you install the print server.
For the purpose of illustration, we assume the NDS tress structure is as follows:
[ROOT]
(O)ABC
(OU)ABC-USA (OU)Sales
Admin
FileServer-1 (OU) Tech
Installation Procedure
1. At your file server console, type “ load install ”.
2. Select “ NCF files options ”.
3. Select “ Edit AUTOEXEC.NCF file ”.
4. Add or Modify the “ SET BINDERY CONTEXT = ” line to include the NDS organization
(O) and all organization unit (OU) objects where users are located. For example: SET
BINDERY CONTEXT = O=ABC; OU=SALES.OU=ABC-USA.O=ABC;
OU=TECH.OU=ABC-USA.O=ABC ;
5. When done, save the new AUTOEXEC.NCF file. Please restart your NetWare file
server in order for new settings to take effect immediately.
6. Next, please refer to “ Auto Setup ” section in this chapter to finish installing your print
server.