Host Name: Type the
in the text box. The host name is required by some
s. The default
host name is "AP-Router."
IP Address: This is the
of the router. The default IP address is 192.168.1.1.
Subnet Mask: Type the
for the router in the text box. The default subnet mask is
255.255.255.0.
DHCP Server: Enables the
server to allow the router to automatically assign IP addresses to
devices connecting to the WLAN or
. DHCP is enabled by default. All DHCP client computers are
listed in the table at the bottom of the page, providing the host name, IP address, and MAC address of
the client.
Start IP: Type an
to serve as the start of the IP range that
addresses to all
devices connected to the WRT-410A.
End IP: Type an
to serve as the end of the IP range that
addresses to all
devices connected to the WRT-410A.
Domain Name: Type the local
of the network in the text box. This item is optional.
Lease Time: Select the proper expired duration of the IP leased by DHCP server.
3.1.2 WAN
Please refer to your Internet connection method to select the Connection Type. And please configure
those settings per the information your ISP provides.
Connection Type:
Select the connection type, DHCP client/Fixed IP, PPPoE, PPTP, or L2TP from the
drop-down list.
When using DHCP client/Fixed IP, enter the following information in the fields (some information are
provided by your ISP):
WAN IP:
Select whether you want to specify an IP address manually, or want DHCP to obtain an IP
address automatically. When “Specify IP” is selected, type the IP address, subnet mask, and default
gateway in the fields. Your ISP will provide you with this information.
DNS 1/2/3:
Type up to three DNS numbers in the fields. Your ISP will provide you with this DNS
information.
- 7 -
