Planet WPG-200N, User Manual, Page: 30 / 53

PLANET 802.11n Wireless Presentation Gateway
Step 1. Click “ Conference Control ”.
Step 2. Enter the password. The default value is “ trainer ”. Then press Login button.
Figure 4-3
Step 3. After login, you can see a user list on the screen which indicates the clients who have already login
into the WPG utility. There are three columns, “ Name ”, “ Play Control ” and “ IP Address ”.
There are six buttons:
Play (Full Screen) Play Split #1 Play Split #2
Play Split #3 Play Split #4 Stop
Figure 4-4
4.3. Admin
This function allows you to login web management UI of WPG-200N. Click “ Admin ”, and enter the password.
The default value is “ admin ”. Then click the Login button or press the Enter key.
Please refer to the following sections for further configuration of the web management UI.
30