User’s Manual of WNRT-633
-65-
The page includes the following fields:
Object
Description
Enable WDS
Check the box to enable the WDS function. Please select
WDS
or
AP+WDS
in the Mode of
Wireless Basic Settings
before you enable
WDS on this page.
MAC Address
You can enter the MAC address of the AP you want to connect with.
Data Rate
Default is “
Auto”
.
Comment
You can make some comment for each MAC address on the list.
Set Security
Click the “
Set Security
” button, then configure the wireless security
parameters of the AP you want to connect via WDS.
Show Statics
Click the “Show Statics” button to show the WDS AP.
Current WDS AP List
You can select some MAC address of the AP, and click the “Delete
Selected” button to delete it.
1. WDS feature can only be implemented between 2 wireless devices that both
support the WDS feature. Plus,
SSID
,
channel
,
security settings
and
security
key
must be
the same
on both such devices.
2.
To encrypt your wireless network, see
sections 5.5.3
. Do remember to reboot the
device after you save your wireless security settings; otherwise, the WDS feature
may not function.
5.5.6 Site Survey
Choose menu “
Wireless
Site Survey
” to scan the available local AP. If any Access Point is found,
you could choose any one to connect with manually when the
Client Mode
is enabled.
Figure 5-5-11
Wireless Site Survey
