User’s Manual of WNRT-633
-45-
DHCP
You can select one of
Disable
,
Client
,
and Server
. Default is
Server,
that the WNRT-633 can assign IP addresses to the computers
automatically.
DHCP Client Range
For the
Server
mode, you must enter the DHCP client IP address
range in the field. And you can click the “
Show Client
” button to show
the Active DHCP Client Table.
Static DHCP
Click the “
Set Static DHCP
” button, and you can reserve some IP
addresses for those network devices with the specified MAC
addresses anytime when they request IP addresses.
Domain Name
Default is
Router
.
802.1d Spanning Tree
You can enable or disable the spanning tree function.
Clone MAC Address
You can input a MAC address here for using clone function.
If you change the device’s LAN IP address, you must enter the new one in your
browser to get back to the web-based configuration utility. And LAN PCs’ gateway
must be set to this new IP for successful Internet connection.
5.4.2 Static DHCP
This page allows you reserve IP addresses, and assign the same IP address to the network device
with the specified MAC address any time it requests an IP address. This is almost the same as when a
device has a static IP address except that the device must still request an IP address from the DHCP
server.
Figure 5-4-2
Static DHCP Setup screenshot
