Planet WNAP-1260, User Manual

Page: 114 / 154

User’s Manual of WNAP-1260
-106-
8.10.4. SNTP
Choose Management Function > SNTP and the SNTP page is displayed.
Figure 8-50
SNTP refers to Simple Network Time Protocol . In this page, you can set time information of your
router. It is strongly recommended to set the correct time on the router first. This ensures proper
functioning of log, site blocking, and schedule because their time settings are based on time
information in this page.
Object Description
 Automatically
synchronize with
Internet time
servers
:
If selected automatic synchronization with the network time server is
enabled
 First NTP time
server
:
Enter the IP address of the primary NTP server. The NTP server is a
network time server that is used to synchronize the time of
computers on the Internet. When you set the first NTP time server,
the router obtains GMT time from the specified NTP server with
priority after it is connected to the Internet
 Second NTP time
server
:
Enter the IP address of the secondary NTP server if available
 Current Router
Time
:
Display the current system time of the router

Time Zone :
Select the time zone where you are located.

Enable Daylight
Saving
:
Enable or disable daylight saving time (DST).

Daylight Saving
Offset
:
Select a proper offset. If it is set to +1:00, 10:00 in the morning in
standard time becomes 11:00 in the morning in DST
 Daylight Saving
Dates
:
Set the starting time and ending time of DST
After finishing settings, click Apply to save the settings.