Planet WGSW-24000 User Manual Download Page 39

Page: 39 / 158

▫

Task Id

The task ID of the event.

▫

Code

The

event

code.

▫

Time

The time this event occurred.

Note

Event log information is retained across a switch reset.

7.1.3 show hardware

This command displays inventory information for the switch.

▫

Format

show

hardware

▫

Mode

Privileged EXEC

▫

Switch Description

Text used to identify the product name of this switch.

▫

Machine Type

Specifies the machine model as defined by the Vital Product Data.

▫

Machine Model

Specifies the machine model as defined by the Vital Product Data.

▫

Serial Number

The unique box serial number for this switch.

▫

FRU Number

The field replaceable unit number.

▫

Part Number

Manufacturing

part

number.

▫

Maintenance Level

Indicates hardware changes that are significant to software.

▫

Manufacturer

Manufacturer descriptor field.

▫

Burned in MAC Address

Universally assigned network address.

▫

Software Version

The release version number of the code currently running on the switch.

▫

Operating System

The operating system currently running on the switch.

▫

Network Processing Element

The type of the processor microcode.

▫

Additional Packages

This displays the additional packages that are incorporated into this

system, such as BGP-4, or Multicast.

7.1.4 show interface

This command displays a summary of statistics for a specific port or a count of all CPU traffic based upon

the argument.

▫

Format

show interface {<slot/port> | switchport}

▫

Mode

Privileged

EXEC

The display parameters when the argument is '<slot/port>' are as follows:

▫

Packets Received Without Error

The total number of packets (including broadcast packets and

multicast packets) received by the processor.

▫

Packets Received With Error

The number of inbound packets that contained errors

preventing them from being deliverable to a higher-layer protocol.

▫

Broadcast Packets Received

The total number of packets received that were directed to the

broadcast address. Note that this does not include multicast packets.

▫

Packets Transmitted Without Error

The total number of packets transmitted out of the

Summary of Contents for WGSW-24000































































































































































Search results

Summary of Contents for WGSW-24000

Reviews:

Planet WGSW-24000, User Manual, Page: 39 / 158

Search results

Summary of Contents for WGSW-24000

Reviews: