User’s Manual of WGSD-1022/WGSD-8000
- 310 –
Console(config-pubkey-chain)#
user-key
bob
Console(config-pubkey-key)#
key-string
rsa
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl
5.22.8 key-string
The
key-string
SSH public key-string configuration command manually specifies a SSH public key.
Syntax
key-string text
text
— Authentication string that must be sentand received in the packets, using the routing protocol being authenticated.
The string can contain from 1 to 16 uppercase and lowercase alphanumeric characters.
Default Configuration
By default, the keys do not exist.
Command Mode
SSH Public Key-string configuration
User Guidelines
Use the
key-string row
command to specify the SSH public key row by row. Each row must begin with the
keystring row
command. This command is useful for configuration files.
UU-encoded DER format is the same format in authorized_keys file used by OpenSSH.
Example
The following example enters public key strings for SSH public key clients called "bob".
Console(config)#
crypto key pubkey-chain ssh
Console(config-pubkey-chain)#
user-key
bob
rsa
Console(config-pubkey-key)#
key-string rsa
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl
Al4kpqIw9GBRonZQZxjHKcq
ZNXQusIZ/76ILmFT34v7
Vu4GRfpSwoQUvV35LqJJk67IOU/zfwOl1g
kTwml75QR9gHujS6KwGN2QWXgh3ub8gDjTSq
muSn/Wd05iDX2IExQWu08licglk02LYciz
+Z4TrEU/9FJxwKBXuR0juNg5nFYsY
0ZCk0N/W9a/tnkm1shw3fNiOA
6AINEICBCCA4YcF6zMzaT1w
