Planet WGS-4215-8T2S, User Manual, Page: 76 / 359

User’s Manual of WGS Managed Series
76
4.2.6.3 Remote Syslog
Configure remote syslog on this page. The Remote Syslog page allows you to configure the logging of messages that are sent
to syslog servers or other management stations. You can also limit the event messages sent to only those messages below a
specified level.
The Remote Syslog screens in Figure 4-2-16 & Figure 4-2-17 appear.
Figure 4-2-16
Remote Log Target Page Screenshot
The page includes the following fields:
Object Description
•
Server Address
Provide the remote syslog IP address of this switch.
•
Server Port
Provide the port number of remote syslog server.
Default Port no.:
514
•
Severity
The severity of the local log entry. The following severity types are supported:

emerg
: Emergency level of the system unstable for local log.

alert
: Alert level of the immediate action needed for local log.

crit
: Critical level of the critical conditions for local log.

error
: Error level of the error conditions for local log.