Planet WGS-4215-8T2S User Manual Download Page 130

Page: 130 / 359

User’s Manual of WGS Managed Series

130

4.5.4 Create VLAN

Create/delete VLAN on this page. The screens in

Figure 4-5-3

Figure 4-5-4

appear.

Figure 4-5-3

VLAN Setting Page Screenshot

The page includes the following fields:

Object

Description

•

VLAN List

Indicates the ID of this particular VLAN.

•

VLAN Action

This column allows users to add or delete VLAN s.

•

VLAN Name Prefix

Indicates the name of this particular VLAN.

Buttons

: Click to apply changes.

Figure 4-5-4

VLAN Table Page Screenshot

The page includes the following fields:

Object

Description

•

VLAN ID

Display the current VLAN ID entry

•

VLAN Name

Display the current VLAN ID name

•

VLAN Type

Display the current VLAN ID type

•

Modify

Click

to modify VLAN configuration

Summary of Contents for WGS-4215-8T2S








































































































































































































































































































































































Search results

Summary of Contents for WGS-4215-8T2S

Reviews:

Planet WGS-4215-8T2S, User Manual, Page: 130 / 359

Search results

Summary of Contents for WGS-4215-8T2S

Reviews: