User’s Manual of WGS Managed Series
120
4.4.5 LACP Port Setting
This page is used to configure the LACP port setting. The LACP Port Setting screens in
Figure 4-4-10
&
Figure 4-4-11
appear.
Figure 4-4-10
LACP Port Setting Page Screenshot
The page includes the following fields:
Object
Description
•
Port Select
Select port number from this drop-down list to set LACP port setting.
•
Priority
The Priority controls the priority of the port.
If the LACP partner wants to form a larger group than is supported by this device,
then this parameter will control which ports will be active and which ports will be
in a backup role.
Lower number means greater priority.
•
Timeout
The Timeout controls the period between BPDU transmissions.
Short will transmit LACP packets each second, while Long will wait for 30
seconds before sending an LACP packet.
Buttons
: Click to apply changes.
Figure 4-4-11
LACP Port Information Page Screenshot
Summary of Contents for WGS-4215-8T2S
