User Manual of WDAP-C7200AC/WDAP-W7200AC
-60-
Figure 5-41
WDS – Set Security
The page includes the following fields:
Object
Description
Enable WDS
Check the box to enable the WDS function. Please select
WDS
or
AP+WDS
in the Mode of
Wireless Basic Settings
before you enable
WDS on this page.
MAC Address
You can enter the MAC address of the AP you want to connect with.
Data Rate
Default is “
Auto”
.
Comment
You can make some comment for each MAC address on the list.
Set Security
Click “
Set Security
” to configure the wireless security parameters of the
AP you want to connect via WDS.
Show Statics
Click “
Show Statics
” to show the WDS AP.
Current WDS AP List
You can select some MAC addresses of the AP and click “
Delete
Selected
” to delete it.
WDS feature can only be implemented between 2 wireless devices that both support the WDS
feature. Plus,
channel
,
security settings
and
security key
must be
the same
on both such
devices.
To encrypt your wireless network, click “
Set Security
”. For the detail of wireless security, see
. Do remember to reboot the device after you save your wireless security settings;
otherwise, the WDS feature may not function.
