Planet WAP-200N, User Manual, Page: 94 / 118

User Manual of WAP-200N/WBS-200N
-93-
5.6.9 CLI Settings
The command line interface (CLI) allows user to access the device through a command console, modem or
Telnet connection for configuration.
Click “ Management

CLI Settings ” to enable/disable CLI (Command Line Interface).
Figure 5-56 CLI Settings
The page includes the following settings:
Object Description
•
CLI
Select ON/OFF to enable or disable the ability to modify the device via a
command line interface (CLI).
•
Save/Apply Click Save/Apply to apply all changes.
•
Cancel
Click Cancel to cancel the settings.
5.6.10 Log
Click “ Management

Log ” to enable/disable system log.
Figure 5-57 Log