Planet WAP-200N, User Manual, Page: 76 / 118

User Manual of WAP-200N/WBS-200N
-75-
Figure 5-39 Security Settings – WEP
The security mode includes the following settings:
Object Description
•
Security Mode
Select WEP from the drop-down list to configure the wireless network
using WEP encryption method.
•
Auth Type
Select Open System or Shared.
•
Input Type Select an input type of Hex or ASCII.
•
Key Length
Level of WEP encryption is applied to all WEP keys.
Select a 64-/128-/152-bit password length.

40/64-bit: enter 10 hexadecimal digits (any combination of 0-9, a-f,
A-F and null key is not permitted) or 5 ASCII characters.

104/128-bit: enter 26 hexadecimal digits (any combination of 0-9,
a-f, A-F and null key is not permitted) or 13 ASCII characters.

128/152-bit: enter 32 hexadecimal digits (any combination of 0-9,
a-f, A-F and null key is not permitted) or 16 ASCII characters.
•
Default Key
Select 1 – 4 to specify which of the four WEP keys the device uses as its
default.
•
Key1 – Key4
Specify a password for the security key index. For security, each typed
character is masked by a dot.
•
Save
Click Save to save the settings.
•
Cancel
Click Cancel to cancel the unsaved changes and revert to the previous
settings.