Planet WAP-200N, User Manual, Page: 68 / 118

User Manual of WAP-200N/WBS-200N
-67-
When clicking Add Entry , the following window will pop up and fill in the fields required to add a new forwarding
rule.
Figure 5-30 Port Forwarding
The page includes the following settings:
Object Description
•
Service Name
Enter a name for the port forwarding rule.
•
Protocol Select a protocol for the application: Choices are Both, TCP and UDP.
•
Starting Port (1~65535)
Enter a starting port number.
•
Ending Port (1~65535)
Enter an ending port number.
All ports numbers between the starting and ending ports will forward users
to the IP address specified in the IP Address field.
•
IP Address
Enter the IP address of the server computer on the LAN network where
users will be redirected.
•
Save
Click Save to save the new forwarding rule.
•
Cancel
Click Cancel to cancel the setting.
5.4.5 DMZ Settings
The DMZ function allows the device to redirect all packets going to the WAN port IP address to a particular IP
address on the LAN. The difference between the virtual server and the DMZ function is that a virtual server
redirects a particular service or Internet application, such as FTP, to a particular LAN client or server, whereas a
DMZ redirects all packets, regardless of the service, going to the WAN IP address to a particular LAN client or
server.
Go to the “ Operation Mode ” page to configure the device as “ Client Router ” and then go to “ Router

DMZ
Settings ” to enable/configure DMZ in client router mode.