2.8 VPN
Virtual Private Network (VPN) provides a secure, private communication tunnel between two or
more devices across the Internet. These VPN devices can be either a computer running VPN
software or a special device like a VPN enabled router. It allows your home computer to be
connected to your office network or can allow two home computers in different locations to
connect to each over the Internet.
Note
: To enable the VPN settings select
Enable
and click
Apply
Parameters
Description
2.8.1 IPSec Server
IPSec Server allows you to set up a server that enables secure
data transfer between two devices or private networks.
2.8.2 L2TP Server
L2TP Server allows you to set up a server that allows users
connect with L2TP over IPSec protocol.
2.8.3 PPTP Server
PPTP Server allows you to set up a server that allows users
connect with PPTP protocol.
Click on one of the VPN selections and proceed to the manual’s relevant sub-section
2.8.1 IPSec Server
IPsec (IP Security Protocol) is an extended IP protocol which enables secure data transfer. It
provides services similar to SSL/TLS, however, these services are provided on a network layer.
67
Summary of Contents for VRT-401G
Page 1: ...54M Wireless VPN Firewall Router VRT 401G User s Manual 1...
Page 37: ...AP Mode setting Page Station Ad Hoc mode setting page 37...
Page 38: ...Station Infrastructure mode setting page AP Bridge Point to Point mode setting page 38...
Page 39: ...AP Bridge Point to Multi Point mode setting page AP Bridge WDS mode setting page 39...
