Planet VIP-2020PT, User Manual

Page: 91 / 107

Enterprise HD PoE IP Phone
VIP-2020PT
Phone Flash
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The
address can be IP address or Domain name with subdirectory.
Config File Name
Set configuration file’s name which need to update. System will
use MAC as config file name if config file name keep blank. For
example, 000102030405.
Protocol Type Specify the Protocol type FTP, TFTP or HTTP.
Update Interval Specify update interval time, unit is hour.
Update Mode
Different update modes:
1. Disable: means no update.
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
TR069 Settings
Enable TR069 Enable TR069 by selecting it.
ACS Server Type Specify the ACS Server Type.
ACS Server URL Specify the ACS Server URL.
ACS User Specify ACS User.
ACS Password Specify ACS Password.
TR069 Auto Login Enable TR069 Auto Login by selecting it.
"Inform" Sending Period Specify the “inform” Sending Period, unit is second.
8.3.6.2 SYSLOG
Syslog is a protocol which is used to record the log messages with client/server mechanism.
Syslog server receives the messages from clients, and classifies them based on priority and
type. Then these messages will be written into log by some rules which administrator can
configure. This is a better way for log management.
8 levels in debug information:
Level 0---emergency: This is highest default debug info level. User system cannot work.
Level 1---alert: User system has deadly problem.
Level 2---critical: User system has serious problem.
Level 3---error: The error will affect User system working.
Level 4---warning: There are some potential dangers. But User system can work.
Level 5---notice: User system works well in special condition, but User need to check its
working environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info Professional debugging info from R&D person.
At present, the lowest level of debug information is info; debug level only can be displayed on
telnet.