18
(4) VF-101G/102G/106G-R
(Receiver):
Connect
coaxial
cable from monitor/HDVR to Video BNC port of the
VF-101G/102G/106G-R.
(5) Connect
the
5V
DC
power
adapter
to
the
VF-101G/102G/106G-T and VF-101G/102G/106G-R, and
make sure that the power is on and the link LED is lit.
(6) Turn on the power of the analog camera/monitor; the video
LED should be lit when all cables are connected.
VF-101G/102G/106G-T
Transmitter
VF-101G/102G/106G-R
Receiver
Coax
Video
Speed Dome
HDVR / Monitor
Control Keyboard
Up to 20km
Coax
Video
Gigabit Fiber-optic
1000
RS485
RS485
Video Line
Video
RS485
RS485
1000
3.4 Optional Chassis Installation
To install the Video over Fiber Converter in a 10-inch or 19-inch
Converter Chassis with standard rack, follow the instructions
described below.
(1) Place your Converter Chassis on a hard flat surface, with
the front panel positioned toward your front side.
(2) Carefully slide in the module until it is fully and firmly fitted
into the slot of the Converter Chassis.