10
3. Deployed Devices Monitored via NMS-360V Controller
Prior installation
The NMS-360V is used to centrally manage a large number of BSP-360s(V2).
Therefore, you need to upgrade the BSP-360(V2) firmware before using NMS-360V.
Please download and use the latest BSP-360(V2) firmware from the website so
that setting can be completed smoothly.
The NMS-360V incorporated in a workstation or PC can monitor the BSP-360s
compliant with the
MQTT Protocol, SNMP Protocol, ONVIF Protocol
and
PLANET Smart Discovery
utility.
Follow the steps below to set up the NMS-360V and BSP-360(V2) accordingly.
Step 1.
Connect the devices, NMS-360V Controller and your computer, to the
same network.
PC / Workstation with
Web Browser 192.168.1.x
192.168.1.x
Managed AP
IP Camera
192.168.1.x
PoE
PoE
NMS-360V
Default IP: 192.168.1.100
BSP-360
192.168.1.x
Step 2.
BSP-360: Log in to the Switch’s Web User Interface and
enable
the
SNMP and NMS controller
functions.