Planet NAS-7400 User Manual Download Page 92

Page: 92 / 149

PLANET NAS-7400 User Manual

6.4 Managing RAID Volumes

6.4.1 Viewing RAID Volume Status

RAID status refers to the disk drives on your NAS-7400 and how they are
arranged into a RAID Volume.

To view the status of your RAID Volume,

Please click on the + button beside the RAID & File System icon

ii.

And then click on the RAID Management icon to view the RAID
status.

iii.

The RAID Status tab displays the current RAID system and its
status:



RAID Name – The name of your RAID, automatically assigned when it

was created



RAID Level – RAID 0, 1, 5, or 10, specified when it was created



Capacity – Data capacity of the RAID Volume in GB



RAID Status -



Functional is normal.



Critical means a disk drive has failed.



Offline means you cannot access your data.



Critical and offline RAIDs require you to take corrective action.



Action Status -



Idle is normal.



Rebuilding means the RAID Volume is being rebuilt after a disk
drive failure.



Migrating means the RAID Volume is adding a disk drive or
changing RAID levels.

Summary of Contents for NAS-7400






















































































































































Search results

Summary of Contents for NAS-7400

Reviews:

Related manuals for NAS-7400

Brands by name

Popular brands

Planet NAS-7400, User Manual

Search results

Summary of Contents for NAS-7400

Reviews:

Related manuals for NAS-7400

Brands by name

Popular brands