manualshive.com logo in svg

Planet ISW-1022M, User Manual, Page: 34 / 141

Share
Download
Planet ISW-1022M User Manual Download Page 34

User’s Manual of ISW-1022M 

34

 

5.2 Requirements 

•

  Workstations of subscribers running Windows 98/ME, NT4.0, 2000/2003/XP, MAC OS9 or later, Linux, UNIX or other 

platform compatible with TCP/IP protocols.    

•

 Workstation 

installed 

with 

Ethernet NIC (Network Card) 

•

 

Ethernet Port connect 

¾

  Network cables - Use standard network (UTP) cables with RJ45 connectors. 

¾

  Above PC installed with WEB Browser and JAVA runtime environment Plug-in

 

 

 

 

It is recommended to use Internet Explore 6.0 or above to access ISW-1022M Managed Industrial 
Switch.  

 

5.3 Logging on the switch 

1. 

Use Internet Explorer 6.0 or above Web browser. Enter the factory-default IP address to access the Web interface. 

The factory-default IP Address as following:   

 

http://192.168.0.100

   

 

2. 

When the following login screen appears, please enter the default username

 "admin"

 with password “

admin

” (or 

the username/password you have changed via console) to login the main screen of Managed Industrial Switch. The 

login screen in 

Figure 5-1 

appears.  

 

Figure 5-1

 Login screen 

Summary of Contents for ISW-1022M














































































































































Reviews:

No comments