Planet IPX-330 User Manual Download

Page: 52 / 96

Internet Telephony PBX System

IPX-330

Busy Detection

Enable/Disable Busy Detection.

Busy Count

Count the Busy Detection. It will be active when enabling

Busy Detection.

4.1.3 Global SIP Settings

【

Global SIP Settings

】

is appropriate for professionals. If anything needs to be modified,

please contact our tech-support people.

Item

Explanation

UDP Port to bind to

SIP standard port is 5060

TCP Port

Default TCP port is 5060

TLS Port

Default TLS port is 5061

Start RTP Port

RTP port range

End RTP Port

RTP port range

DTMF Mode

Set default DTMF mode for sending DTMF, support auto,

RFC2833, inband, info. Default: RFC 2833

Max Registration/Subscription

Time

Maximum duration (in seconds) of incoming

registrations/subscriptions is 3600 seconds by default

Min Registration/Subscription

Time

Minimum duration (in seconds) of

registrations/subscriptions is 60 seconds by default

Default Incoming/Outgoing

Registration Time

Default duration (in seconds) of incoming/outgoing

registration

Summary of Contents for IPX-330

































































































Search results

Summary of Contents for IPX-330

Reviews:

Related manuals for IPX-330

Brands by name

Popular brands

Planet IPX-330, User Manual

Search results

Summary of Contents for IPX-330

Reviews:

Related manuals for IPX-330

Brands by name

Popular brands