manualshive.com logo in svg

Planet IPX-2100, User Manual

Introducing the extraordinary Planet IPX-2100! Get up and running swiftly with our Quick Installation Manual – your ultimate guide to seamlessly setting up this cutting-edge product. Say goodbye to confusion and hello to convenience. Download your free manual now at manualshive.com, and unlock the unlimited potential of the IPX-2100.

Share
Download
background image

 

Internet Telephony PBX System 

IPX-330/IPX-2100 

 

98

 

4.3.4 IPSec VPN 

Internet Protocol Security (IPsec) is a protocol suite for secure Internet Protocol (IP) 

communications by authenticating and encrypting each IP packet of a communication session.   

IPSec can be configured to operate in two different modes, Tunnel and Transport mode. Use 

of each mode depends on the requirements and implementation of IPSec. 

 

4.3.4.1  IPSec VPN Server (Tunnel mode) 

Tunnel mode is used to encrypt all traffic between secure IPSec Gateways, for example two IP 

PBX's, each acts as an IPSec Gateway for the hosts/IP phones behind it. The WAN ports will 

be used to connect to each other to establish IPSec VPN connection; the PCs or IP phones on 

the LAN ports can communicate with each other on both sides via secured IPSec tunnel. 

Check the IPSec radio button to configure IPSec VPN server. 

 

 

Item 

Explanation 

Enable 

Tick the checkbox to enable IPSec VPN server. 

Type 

Default Tunnel mode. 

IPSec Local IP 

IP PBX WAN IP, which can be used to connect to the client network. 

IPSec Password 

Define a password for authentication of the IPSec client. 

IPSec Remote IP 

IPSec VPN client IP. The client uses this IP to connect to IPSec 

server. 

Summary of Contents for IPX-2100
















































































































































Reviews:

No comments

Related manuals for IPX-2100

Brands by name

Popular brands

Load more brands