Planet IPX-2100 User Manual Download

Page: 108 / 143

Internet Telephony PBX System

IPX-330/IPX-2100

108

Item

Explanation

Enable Enable

TR069

service.

CPE to ACS URL

Input URL to visit ACS, which is used by PBX to connect ACS via

CPE WAN management protocol (CWMP).

ACS

Authentication

Mode

Select ACS Authentication Mode: NONE/ BASIC/ DIGEST.

ACS Username

When PBX send request to ACS, ACS will provide username to the

authorized PBX.

ACS Password

When PBX send request to ACS, ACS will provide password to the

authorized PBX.

CPE Inform

Interval (sec)

Interval for CPE to connect ACS.

ACS to CPE URL

Input URL to visit CPE. Format: http://IP:port(7547).

4.9 Troubleshooting

Troubleshooting includes two tools for you to check the network reachability, ping and

traceroute. With these tools you'll get an outside view of your network response time and

network topology, which allows you to track down possible errors more easily

Click

【

Network Settings

】

【

Troubleshooting

】

4.9.1 Ping

The ping command is a very common method for troubleshooting the accessibility of devices.

It uses a series of Internet Control Message Protocol (ICMP) Echo messages to determine:

Whether a remote host is active or inactive.

The round-trip delay in communicating with the host.

Packet

loss.

Summary of Contents for IPX-2100
















































































































































Search results

Summary of Contents for IPX-2100

Reviews:

Related manuals for IPX-2100

Brands by name

Popular brands

Planet IPX-2100, User Manual

Search results

Summary of Contents for IPX-2100

Reviews:

Related manuals for IPX-2100

Brands by name

Popular brands