7
No external power cable required for installation
Plug and Play
installation
Note
PSE (Power Sourcing Equipment)
is a device (switch
or injector for instance) that provides power in a PoE
setup. Maximum allowed continuous output power per
such device in IEEE 802.3af is 15.4W, in IEEE 802.3at is
30W, and in IEEE 802.3bt is 60W.
PDs (Powered Devices)
like PoE IP phones, PoE IP
cameras, PoE wireless access points, etc. are PoE-enabled
terminals that consume energy via PSE.
1.3 Product Specifications
Model
IPOE-E172
Hardware Specifications
Network Connector
PoE In Port
1 x 10/100/1000BASE-T Ethernet with
802.3bt/at PoE
“Data + Power”
in, auto
MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
2 x 10/100/1000BASE-T Ethernet with IEEE
802.3af/at/bt PoE
“Data + Power”
out,
auto MDI/MDI-X, auto-negotiation RJ45
connector
Switch Architecture
Store-and-Forward switch architecture
MAC Address Table
2K MAC address table with auto learning
function
Data Buffer
1Mbit
Switch Fabric
6Gbps
Switch Throughput
4.46Mpps @ 64 bytes
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame
9KB
ESD Protection
2KV DC