IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
10
-
1.3 Features
Hardware
■
Desktop/1U rack-mount size design
■
IEC outlet models
■
4/8 power outlets that support real-time current image monitoring
■
4/8 LEDs show power status for each power outlet
■
LCD panel displays current, maximum alarm and network information
■
Switch/Set button to lock up protection to avoid modification (For IPM-8220)
■
Buzzer will ring when total power consumption value exceeds set value
■
Circuit breaker can avoid damage that is caused by overload
■
Versatile sensors supported through environmental sensor box (ESB) inputs
Power Distribution
■
Maximum Amps/Inlet: IEC 16A for 1 inlet
■
Maximum Amps for 4/8 Outlets: IEC 16A for 4/8 outlets
■
Full Frequency Range: 50~60Hz
■
Supports multiple power control methods – Wake on LAN, System After AC Back, Kill the
Power
Remote Access
■
Remote power control via TCP/IP and a built-in 10/100Mbps Ethernet port
■
Multi browsers support (IE, Google, Firefox, Safari, Opera, Netscape)
Management
■
Provides Install Wizard to ease users' setting of parameters
■
Events notification by sending pop-up message, trap, SMS or e-mail
■
Supports Management Information Base (MIB) files for SNMP
■
Naming support for outlets
■
Power-on sequencing intelligently turns on/off devices based on event occurrence or
planned schedule
■
Voltage, current, wattage and total kWh report
■
Sets over-current watchdog for power outlet
■
External UPS can be installed for a possible power outage
