manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 559

IP DSLAM 

 

559

Output field: 

Field 

 

Description 

 

Profile Identifier 

 

Traffic class profile identifier. 

Class Id 

 

Traffic class profile class identifier. 

Traffic Class Param Size 

 

This parameter specifies the size of the Traffic class. 

Traffic Class Param Thresh 

  This parameter specifies the low threshold of    the queue, as a 

percentage of the queue size. When the queue is full beyond 

this threshold, only conforming frames are passed and 

non-conforming frames are dropped. Conformance of frames is 

determined as per IRL configured on input the ATM port. 

 

References:

 

z

 

See traffic class profile related commands. 

 
 

5.21.11 Trfclass profile info Commands 

 

5.21.11.1 Get trfclass profile info 

 

Description: 

Use this command to get. 

 

Command Syntax:

 

get trfclass profile info 

[

profileid

 <profileid-val>]

 

 

5.21.11.2 Create trfclass profile info 

 

Description: 

Use this command to get. 

 

Command Syntax: 

create

 

trfclass profile info profileid

 <profileid-val> 

iftype

 eth | atm 

 

5.21.11.3 Delete trfclass profile info   

 

Description: 

Use this command to delete. 

 

Command Syntax:

 

get trfclass profile info profileid

 <profileid-val> 

 

 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands