manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 535

IP DSLAM 

 

535

Example

: 

$ create irl map ifname aal5-0 profilename gold 

 

Output: 

Verbose Mode On 

Entry Created 

   

Interface  Profile Name  

------------------------------------------------------------ 

aal5-0     gold  

Verbose Mode Off: 

Entry Created 

 

Output field: 

Field 

 

Description 

 

Interface 

 

Interface Name whose IRL mapping information 

is to be configured. 

Valid Values:

 aal5-0 - aal5-*   

Profile Name 

 

Specifies the name of the IRL profile to be 

associated with the interface. String of up to 64 

characters ( 'A'- 'Z', 'a'-'z', '0'-'9','-','_') and any 

combination of printable characters excluding ';'   

 
 

5.21.2 IRL Profile Commands 

 

5.21.2.1 Get irl profile 

 

Description: 

Use this command to get. 

 

Command Syntax:

 

get irl profile 

[

profilename

 <profile-name>]   

 

5.21.2.2 Create irl profile 

 

Description:

 

Use this command to create. 

 

 

 

 

 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands