manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 360

IDL series User Guide

 

360 

Output field: 

Field 

 

Description 

 

Tree Name 

 

Name of the classifier tree 

Status 

 

A tree cannot be deleted or modified, if it is enabled. A tree can only be 

used, if it is enabled. A tree can not be disabled, if it is being used. 

Description 

 

A brief description can be given with tree, to identify the tree 

TreePriority

 

Tells the priority of the tree. Based on this priority value, the tree is 

created in fast or slow memory. 

 
 

5.13.12 Clfr tree map Commands 

 

5.13.12.1 Get clfr tree map 

 

Description: 

Use this command to get. 

 

Command Syntax: 

get clfr tree map

 [

ifname

 <interface-name>] 

 

5.13.12.2 Create clfr tree map 

 

Description

: 

Use this command to create. 

 

Command Syntax: 

create clfr tree map ifname

 <interface-name>

tname

 <tname-val> 

entrypid

 

<entrypid-val> 
 

5.13.12.3 Delete clfr tree map 

 

Description:

 

Use this command to delete. 

 

Command Syntax:

 

delete clfr tree map ifname

 <interface-name> 

 

 

 

 

 

 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands