Planet IP DSLAM IDL-2400 User Manual Download Page 343

Page: 343 / 707

IP DSLAM

343

5.13.7.3 Delete clfr profile branch

Description:

Use this command to delete.

Command Syntax:

delete clfr profile branch pname

<pname-val>

nodeid

<nodeid-val>

brtype

<brtype-val>

Parameter:

Name

Description

pname

<pname-val>

Name of the classifier profile

Type:

Create -- Mandatory

Delete -- Mandatory

Get -- Optional

nodeid

<nodeid-val>

Node Id of the node, with which the branch is to be

attached.

Type:

Create -- Mandatory

Delete -- Mandatory

Get -- Optional

Valid values:

1 - 4

brtype

<brtype-val>

This specifies the branch types. For a unary type node,

only onlybr(0xfffffffffffffff9) branch type is allowed. For

binary type and Linear/Non-Linear(Access Deny only) type,

TrueBr(0xfffffffffffffffd) and FalseBr(0xfffffffffffffffe) are

allowed. For ternary type nodes LtBr(0xfffffffffffffffc), GtBr

(0xfffffffffffffffb), EqBr (0xfffffffffffffffa) are allowed. For

Linear, Non-Linear (match in list) the actual value is

allowed. The actual value can be U8, U16, U32, U64,

atmIf, ethernetIf, aal5vc.

Type:

Create -- Mandatory

Delete -- Mandatory

Get -- Optional

cnodeid

<cnodeid-val>

Child Node Id

Type:

Create -- Optional

Default value:

Example:

$ create clfr profile branch pname IGMP nodeid 3 brtype truebr

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Brands by name

Popular brands