Planet IP DSLAM IDL-2400 User Manual Download Page 236

Page: 236 / 707

IDL series User Guide

236

5.9.3 ADSL ATUC Channel Commands

5.9.3.1 Get adsl atuc channel

Description:

Use this command to get.

Command Syntax:

get adsl atuc channel

[

ifname

<interface-name>]

Parameters:

Name

Description

ifname

<fname-val>

The ADSL ATUC channel interface name.

Type:

Get – Optional

Valid values:

dsli-0 - dsli-23

Example:

$ get adsl atuc channel ifname dsli-0

Output:

Ifname : dsli-0

Interleave Delay(ms) : 20 Curr Tx Rate(bps) : 80

Prev Tx Rate(bps) : 40 Crc Block Length(byte) : 90

Gs Curr Atm Status : NoAtmDefect GsSymbolsPerRsWord : 10

GsRsDepth : 20 GsRedundantBytesPerRsCode: 100

AtucChanPerfAtmCD : 10 AtucChanPerfAtmCU : 10

AtucChanGsINPdn : 10 AtucChanGsL0dn : 10

AtucChanGsM0dn : 10 AtucChanGsT0dn : 10

AtucChanGsB0dn : 10

Output Fields:

FIELD

Description

Ifname

The ADSL ATUC channel interface name.

Interleave Delay(ms)

Interleave delay for this channel.

Curr Tx Rate(bps)

Actual transmit rate on this channel.

Prev Tx Rate(bps)

The rate at the time of the last adslAtucRateChangeTrap

event.

Crc Block Length(byte)

Indicates the length of the channel data-block, on which

the CRC operates.

Gs Curr Atm Status

Indicates the current ATM Status.

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands