Planet IP DSLAM IDL-2400 User Manual Download Page 202

Page: 202 / 707

IDL series User Guide

202

5.6.13 STP Port Commands

5.6.13.1 Get stp port

Description:

Use this command to display port specific information for the Spanning Tree

Protocol, for all ports, or for the specified port.

Command Syntax:

get stp port info portid

<portid-val>

5.6.13.2 Modify stp port

Description:

Use this command to alter the configuration for the spanning tree protocol.

Command Syntax:

modify stp port info portid

<portid-val>

[enable|disable] [

pcost

<pcost-val>]

[

priority

<priority-val>] [

pktpriority

<pktpriority-val>]

5.6.13.3 Reset stp port stats

Description:

Use this command to reset the STP port stats for a specific interface.

Command Syntax:

reset stp port stats portid

<portid-val>

Parameters:

Name

Description

portid

<portid-val>

The port number of the port for which this entry contains Spanning

Tree Protocol management information.

Type :

Mandatory

Valid values:

1 to 386;

enable|disable

Spanning Tree Protocol to be enabled on the Port or not

Type:

Optional

Valid values:

enable, disable

pcost

<pcost-val>

The contribution of this port to the path cost of paths towards the

spanning tree root, which include this port.

Type :

Optional

Valid values:

1 - 65535

priority

<priority-val>

The value of the priority field which is contained in the most

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands