Planet IP DSLAM IDL-2400 User Manual Download Page 159

Page: 159 / 707

IP DSLAM

159

5.5.4.3 Delete atm port

Description:

Use this command to delete.

Command Syntax:

delete atm port ifname

<interface-name>

5.5.4.4 Modify atm port

Description:

Use this command to modify.

Command Syntax:

modify atm port ifname

<interface-name>[

maxvc

<maxvc-val> ] [

maxvpibits

<maxvpibits-val> ] [

maxvcibits

<maxvcibits-val> ] [

oamsrc

<oamsrc-val> ] [

orl

<orl-val> ] [

trfclassprofileid

<trfclassprofileid-val> ] [

profilename

<profilename-val> ] [

atmtransporttype cell | packet

] [

enable | disable

]

Parameters:

Name

Description

ifname

<interface-name>

Physical interface index

Type:

Create

－

Mandatory

Delete

－

Mandatory

Modify

－

Mandatory

Get

－

Optional

lowif <

lowif-val>

This is the IfIndex of the low interface on which this ATM port is

configured. Lower interface can be of type dsl-* or dsli-* or dslf-* or

abond-*

Type:

Create

－

Mandatory

maxvc <

maxvc-val>

This specifies the maximum number of VCCs (PVCCs), supported at

this ATM interface. This field is not valid if the atmtransporttype has the

value packet

Type:

Create

－

Optional

Modify

－

Optional

Valid values:

1 -8

Default value:

maxvpibits

maxvpibits-val>

The maximum number of active VPI bits configured for use at the ATM

interface.

Type:

Create

－

Optional

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands