Planet IP DSLAM IDL-2400 User Manual Download Page 155

Page: 155 / 707

IP DSLAM

155

CRC Errors count

This specifies the number of CRC errors encountered.

Oversized SDU

This specifies the number of oversized SDUs received.

References:

atm vc related commands

atm port and statistics related commands

atm vc statistics commands.

5.5.2 ATM OAM CC Commands

5.5.2.1 Get oam cc vc

Description:

Use this command to get.

Command Syntax:

get oam cc vc

[

ifname

<interface-name>]

5.5.2.2 Modify oam cc vc

Description:

Use this command to modify.

Command Syntax:

modify oam cc vc ifname

<interface-name> [

action

act | deact] [

dir

sink | src |

both] [

mode

auto | manual]

Parameters:

Name

Description

ifname

<interface-name>

This parameter specifies the interface, for which information is desired.

In case the field is not specified, then the information for all valid

interfaces should be displayed.

Type:

Modify -- Mandatory

Get -- Optional

action

act | deact

This field specifies the CC action to be taken. This is used along with

CC direction field.

Type:

Modify -- Optional

dir

sink | src | both

This field specifies the direction for CC

activation/Deactivation.Direction could be source (src), sink or both.

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands