Planet Internet Telephony PBX System IPX-300 Series User Manual Download

Page: 6 / 96

Chapter 1

Introduction

Overview

PLANET IPX-300/IPX-300W IP PBX telephony systems (“IP PBX” in the following term) are designed

and optimized for the small business in daily communications. It can support up to 100 user

registrations and easy to install and manage a fully working system with the convenience and cost

advantages. The future IP PBX telephony system offers all of the essential features of telephony which

is required by small business users for their telecommunication/data needs.

The IP PBX series are the feature-rich SIP based IP PBX telephony system that integrates NAT

functions to make it perfect for small business usage. The IP PBX integrates traditional PBX system

functions and provides many advanced functions including voice mail to email, web management etc.

Designed to run on a variety of VoIP applications, the IP PBX provide IP-based communications, voice

conferencing, call detailed record (CDR), centralized Auto-Attendant (AA), and Interactive Voice

Responses (IVR). The IP PBX utilizes standard PSTN / GSM lines via the interfaces of FXO / GSM

gateway to become a feature-rich IP PBX telephony system that supports seamless communications

among existing local calls, SIP-based endpoints including low cost of long distance service, telephone

number portability and one network for both voice and data.

With a built-in IEEE 802.11b/g wireless AP / CPE, the Wi-Fi IP PBX (IPX-300W) offers wireless

connectivity via 54Mbps data transmissions. Users may integrate PLANET IP Phone VIP-154T series,

VIP-155PT/ 350PT/ 550PT, the VIP-156/ 157/ 158/ 161W of ATA (analog telephone adapter) series, the

VIP-191/ 192 of Wi-Fi Phone, and Gateway series VIP-281/ 281GS/ 480 to build up the VoIP network

deployment in minutes.

IP PBX Features

•

PBX Features

- Automated Attendant (AA)

- Interactive Voice Responses (IVR)

- Voicemail support (VM)

- Voicemail to E-Mail

- Call Detailed Record (CDR)

- User Management via Web Browser

- Call/Pickup Group

Summary of Contents for Internet Telephony PBX System IPX-300 Series

































































































Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands

Planet Internet Telephony PBX System IPX-300 Series, User Manual

Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands