Planet Internet Telephony PBX System IPX-300 Series User Manual Download

Page: 22 / 96

Gateway Trunk

Gateway Trunk Setting

allows IP PBX makes VoIP calls to external Gateway by peer-to-peer mode. If

the FXO ports of external Gateway have connected with PSTN lines, the user can make outgoing

PSTN calls via external Gateway by this function.

Figure 3-10. Gateway Trunk setting

Destination IP Address is the IP address of the destination

Gateway that owns this phone number.

Port

Port is port of the destination Gateway use. (Default is 5060)

Table 3-10. Gateway Trunk setting description

Trunk Group

is defines the leading digit of the call out dialing number through SIP Trunk or Gateway

Trunk. The IP PBX will according to the leading digit to determine to use which SIP or Gateway Trunks

for outgoing route.

Figure 3-11. Trunk Group setting

Press “more” to show the Service Provider Number under the group.

Figure 3-12. Trunk Group setting - 2

Figure 3-13. Trunk Group more information

Summary of Contents for Internet Telephony PBX System IPX-300 Series

































































































Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands

Planet Internet Telephony PBX System IPX-300 Series, User Manual

Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands